How to install car weather strips

cooling pants

4A0845121C

1. Before installing the door seal, the installed parts and the surface of the seal need to be thoroughly cleaned and dried. Only after it is clean and dry can you ensure that the sealing strip can effectively seal the door.

2. When installing the sealing strip, you need to choose the sticking position. Find the starting point of the seal, press it slightly, be careful not to pull the sealing strip, and try to keep the original shape of the seal. At the same time, be careful to paste and ensure that the pasting path is correct and there is no skew or misalignment.

3. During the pasting process, do not turn too fast, otherwise it will affect the appearance. In addition, 3M glue cannot stick to other impurities such as dust, nor can it be applied in a hurry to ensure the effect.

4. In addition, you need to be careful not to let the sealing strip be pulled or squeezed excessively to avoid affecting the sealing effect.

5. When installing the sealing strip, you need to pay attention to whether the length and width of the sealing strip are appropriate to ensure that the sealing strip can completely cover the gap between the door and the body.

6. After installing the sealing strip, it needs to be tested to ensure that the sealing effect is good. You can wet the door with water and observe whether the sealing strip can be completely sealed to ensure the sealing effect.

7. If the sealing strip is found to be uneven or displaced, it needs to be adjusted in time to ensure the sealing effect.

8. In daily use, you need to pay attention to the maintenance of the sealing strip, clean and replace it regularly to extend the service life of the sealing strip.

In short, it is very important to correctly install car sealing strips, which can improve the comfort and sound insulation in the car, and also protect the car body from the outside environment.